Using your Telli Health Glucose Meter with Brook Remote Care

Step 1

Charge glucose meter with charger provided before first use.


Step 1

Charge glucose meter with charger provided before first use.


Step 1

Charge glucose meter with charger provided before first use.


Step 2

Wash hands with soap and warm water before testing blood sugar to ensure accuracy.

Step 2

Wash hands with soap and warm water before testing blood sugar to ensure accuracy.

Step 2

Wash hands with soap and warm water before testing blood sugar to ensure accuracy.

Step 3

With clean hands, remove a test strip from vial. Do not bend, cut, or modify the test strips in any way.

Step 3

With clean hands, remove a test strip from vial. Do not bend, cut, or modify the test strips in any way.

Step 3

With clean hands, remove a test strip from vial. Do not bend, cut, or modify the test strips in any way.

Step 4

Insert test strip into meter’s test port – this will turn the meter on. Screen will display a flashing blood drop.

Step 4

Insert test strip into meter’s test port – this will turn the meter on. Screen will display a flashing blood drop.

Step 4

Insert test strip into meter’s test port – this will turn the meter on. Screen will display a flashing blood drop.

Step 5

Use lancet to prick the side of your fingertip. Squeeze finger slightly to create a bead, if necessary. Apply blood to absorbent hole of test strip.

Step 5

Use lancet to prick the side of your fingertip. Squeeze finger slightly to create a bead, if necessary. Apply blood to absorbent hole of test strip.

Step 5

Use lancet to prick the side of your fingertip. Squeeze finger slightly to create a bead, if necessary. Apply blood to absorbent hole of test strip.

Step 6

When enough blood has entered the test strip, a beep will occur and the test will begin. The results will show in 5 seconds.

Step 6

When enough blood has entered the test strip, a beep will occur and the test will begin. The results will show in 5 seconds.

Step 6

When enough blood has entered the test strip, a beep will occur and the test will begin. The results will show in 5 seconds.

That’s it! This glucose meter uses a cellular connection to Brook Remote Care, so you can use it right away and your results will automatically be logged for your clinic.

Important Notes:

  1. Only use G-427B blood glucose test strips with this meter.

  2. Press “M” to select General mode (Control CTL mode is only used for testing calibration accuracy).

  3. The clock on your glucose meter will set itself after the first reading is logged.

Brook Inc

113 Cherry St
PMB 30466
Seattle, Washington 98104

Connect with Brook
Brook Inc

113 Cherry St
PMB 30466
Seattle, Washington 98104

Connect with Brook
Brook Inc

113 Cherry St
PMB 30466
Seattle, Washington 98104

Connect with Brook